I recently acquired the trousers from Clutch Precision and am now able to draw a direct comparison to the original Wattana KSK trousers.
Of course, when placing both trousers side by side, one can tell that the original model features the well-known and highly sought-after surface coating.
However, apart from that, I must say that the "replica" is almost on par with the original. This applies to the layout of the pockets, the quality of the stitching, and also the "ceramic coating" on the knee area.
I am 190 cm tall, weigh 82 kg, and officially wear Bundeswehr size 13. The trousers fit perfectly, and there is still enough room to wear a second layer underneath if needed.

Following the advice from Clutch Precision, I ordered size 34.

The trousers fit just like the original—not baggy or loose. Simply a dream for a fraction of the price and in the correct size.
Many thanks again to Clutch Precision for the very detailed advice regarding the correct sizing!

Zunächst einmal freue ich mich wirklich sehr über meinen Kauf des Clutch Precision Handguards für die HK416 / G95.

Sobald ich ihn erhalten habe, habe ich ihn direkt an meiner GHK HK416 GBB montiert. Was mich dabei am meisten überrascht hat, war, dass keinerlei zusätzliche Teile oder Modifikationen notwendig waren. Man muss lediglich den originalen Handguard entfernen und den neuen Standard-Handguard montieren — fertig.

Die Passgenauigkeit mit der Waffe ist absolut perfekt, es gibt nahezu keine Spalten, und auch die obere Schiene ist perfekt ausgerichtet. Es ist ein wirklich hochwertiges Produkt, vor allem wenn man bedenkt, dass der Preis eigentlich sehr fair ist.

Das Einzige, worauf man achten sollte: Es wäre schön, wenn der Kundenservice die Sendungsverfolgungsnummer aktiv bereitstellen könnte, außerdem sind die Versandstatus-Updates auf der offiziellen Website etwas langsam.

Absolutely love the quality as well as just how much better my platform performance has improved. Worth the price to increase the longevity of the mp7. I would recommend this to anyone buying this particular platform.

El la primera vez que compro en la tienda y todo muy buin ,hubo un pequeño problema que me resolvieron mui rápido ,el pedido llegó en el tiempo previsto.
El visor es espectacular ,la retroiluminación de la retícula es mui nítida tanto en el visor como en el punto rojo.
Puede parecer muy cara pero vale la pena ,en su conjunto.
Perdonar por la calidad de la foto ,en directo se ve muchísimo mejor

This plate should be a must for any VFC MP7 users. Super easy install. Likely will never fail.

Awesome quality material. Awesome company. Quick shipping!.

Fit no problem. Exactly like it should!

Great part brilliant upgrade

Bobbly's Adjustable Floating Nozzle Valve for VFC GBBR

The first batch of barrels came with a major issue, where the screw holes were not only off center but also not lined up with each other as well. I then discovered that an email had been sent earlier from clutch about the issue and that newer barrels will be sent out automatically free of charge asap. So I held off on making the review until it arrived.

(Old Barrel)
I still ran the old barrel in the meantime, as it felt better than no threads at all. And, I found that only using one side of screws with a bunch of threadlock held up for now. It was also important to use the stock screws as the screws provided were also too long and would dig into the inner barrel. Everything was still slightly canted, but one side was off much less than the other and the piston still hit the gas block (but still a small noticeable gap when not in motion, this is normal but my stock barrel had no gap). But it also meant that to use the barrel, I had to remove the barrel stabilizer thats connected to the gas block for it to fit in the handguard as well. The finish of the barrel was okay with a really solid black. While, the gas block’s was very crude but at least matched the color of the barrel. Lastly, installing the inner barrel back in was really tight fit and required some “encouragement” to get in and out, which was a problem when coming to getting the hop nub aligned right. I damaged my stock inner barrel trying to remove it bc of how tough it was. But I was replacing it with a unicorn barrel anyways, so I wasn’t worried about preserving the stock barrel after a few tries.

(New Barrel)
The new barrel shipped out within a week or two and then arrived a week later. Everything definitely lines up now and the screws provided this time were true to size and theres a more positive contact with the gas block and piston this time with no gap. The barrel finish itself was much better and I prefer it over stock as it is more like VFC’s steel AR barrels, which has a more grayish color. I don’t know which is more realistic compared to the irl counterpart, however I do not mind. The new gas block, on the other hand, has an improved finish, but matches the old steel barrels finish. Which means that, the gas block is a stark solid black versus the gray barrel which can be off putting for some. But, I find that the handguard covers most of it anyways. Also the inner barrel and hop chamber slides and secures itself perfectly now and isn’t a tight fit anymore.

Pros:
- Full steel one piece barrel

- Nice weight (I really want to feel one of the reasons why people hate the irl counterpart as the AFPG was already lighter than expected)

- Hop chamber fitment is not too tight (anymore)

- Fixed (replaced) my threads

- Fast response over the first barrel issues and free replacement for said issues

Cons:
- Weight (Not a fault of the barrel itself but the upgrade as a whole since it’s adding a lot of weight replacing the entire barrel with steel versus only the front gas block barrel set with new threads which can be a turn off for some)

- Color and finish mix match between the barrel and gas block

- Pins and hop chamber fitment for the first batch barrel (this is not an issue with the latest barrel I received but I do find it a common issue of the fit being way too tight at times with other barrels. So, I don’t know if that will be true for future batches but as of now it’s good)

- Having a bad first batch in the first place. (I understand that this was a pre-order and I really appreciate the quick support and complementary replacement barrels, especially not needing to send back the old one. From what I assume, they do ship straight from the factory, most likely to meet the pre-order deadlines and reduce the wait for preorders in general. But, this does miss on the qc. Having good support regarding replacements is a good thing, but I wonder about the logistics and cost of production. I do not mind waiting an extra few weeks after waiting a while already to get a replacement (as long as there is updates). However, I also wouldn’t mind waiting the same amount of time to ship the barrels to clutch and doing a quick qc before shipping out to the customers, to catch the barrel misalignment problem that was with a majority of the first batch barrels)

Overall, I really am satisfied with the upgrade after everything. I do appreciate the updates regarding the issue and automatic replacement for all orders. But for pre-orders, expect some problems but I would check support for any updates. I would’ve appreciated having a basic installation guide similar to the VFC AK105 kit though, as there is limited information about the APFG out as of now. And the only compromise at the end of the day is the color mixmatch of the gas block and barrel if that is a deal breaker.

Hi. Very happy with service. Very fast Delivery to Ireland. I didn't test that stuff yet but I will soon. I think I will get that heavy bolt for Umarex HK 53. I will install that one in my HK 33 gbb.

Absolute beauty of stuff! Cannot recommend them enough if you have an APFG MCX

Very quick delivery from china!!
The quality of the item is seconded to none totally outstanding

Der Handschutz ist hervorragend verarbeitet und passt nahezu ohne Spiel auf die VFC HK416 GBB

VFC MP7 GBB V2 Aluminum Metal Backplate End Plate Assembly with steel Stock Latches